How To Use Bushnell Ion2 Golf Watch?

  • BEFORE USE: Fully charge the battery by inserting the iON2 into the provided charging cradle (contacts on back of watch lined up with pins on left side of cradle) and connecting the cradle’s USB cable to your phone charger or PC. After the watch is fully charged, turn on the watch (lower right button).

How do you turn on a Bushnell Golf watch?

Press and hold the DOWN button (5) to power on the Neo XS Watch. Press the GOLF MENU button (1). Scroll through the menu options by pressing the DOWN (5) and UP (3) buttons. Select the desired feature by pressing the SELECT (4) button.

How do I sync my Bushnell iON2?

To perform a full sync connect your device to the computer, log in to bushnell.iGolf.com and visit the “Device Setup” page. Select the “Sync Device” button and all front, center, back and custom point data will be updated on your device.

How do I update my Bushnell iON2 watch?

You must have your device connected to your phone via Bluetooth for the update to work.

  1. • Open the Bushnell Golf App.
  2. • Select Your Device.
  3. • Choose Course Update.
  4. • Find your course by using Nearby, Recent, or searching for the name.
  5. • Select the course.
  6. • Select Close.

How long does it take to charge a Bushnell iON2?

How long does the Bushnell battery take to charge? Full charging time is estimated to be less three hours.

How do I reset my Bushnell golf watch?

– Hold down the bottom left-hand button and power button together for 15 seconds or until the unit switches off then turn it back on using power button. This will reboot the device and it will no longer be frozen. – The device is relatively sensitive to being “properly ejected” after being plugged into a computer.

See also:  How To Measure Golf Club Size?

How do you turn off Bushnell ion?

Press & hold (7 seconds) to power on/off. *Note: Backlight is activated with any button push. The backlight will remain lit for 10 seconds after last button push.

Why is my Bushnell not working?

Your Bushnell rangefinder has stopped working because it is probably just dirty and needs to be cleaned. You can clean your rangefinder by going into the menu settings and finding “clean.” The instructions will tell you how to proceed from there.

Does Bushnell Golf app use data?

Front, center, back, custom points and 3D graphic representations of each hole along with shot distance and Scorecard Tracking. Sync your runs or bike rides using the fitness data function on your Bushnell Excel GPS Golf Watch to closely evaluate average speed, pace and distance.

Can you change the battery in a Bushnell Golf watch?

You can not change the battery. Do not attempt to open, disassemble or service the internal battery. The battery must be replaced by a qualified technician. If you suspect the battery is not working properly please contact Bushnell Golf support.

How do you charge a Bushnell Golf watch?

BEFORE USE: • Fully charge the battery by inserting the iON2 into the provided charging cradle (contacts on back of watch lined up with pins on left side of cradle) and connecting the cradle’s USB cable to your phone charger or PC. After the watch is fully charged, turn on the watch (lower right button).

How do I update my Bushnell?

Once your device is registered, log into the https://bushnell.igolf.com/ website and connect your device. The website should have you download the installer program and update your device. The device update can take up to 45 minutes.

See also:  Who Makes Slazenger Golf Balls?

What is iGolf Sync app?

Bushnell and iGolf have partnered to provide the world’s largest, most accurate database of GPS course files for your Bushnell GPS devices. Sync your device, download GPS course files, track your handicap, read original content and connect with other golfers, all with your membership to iGolf.com.

Leave a Reply

Your email address will not be published.