How To Dye Disc Golf Discs?

In disc dyeing, the general idea is to use a medium—be it shaving cream, lotion, glue, or a number of other materials—to embed a synthetic dye into the plastic of a disc. The use of multiple layers and vinyl stencils allows for a huge range of possibilities.

What kind of dye do you use for disc golf?

What is the best disc golf dye? I’ve tried a number of dyes including Rit Dye and Indigo but I prefer iDye Poly above all others. Fishing lure worm dye is also a good choice if you’re trying to achieve bright or neon colors. Make sure you’re using Poly otherwise it will be difficult to get the dye to hold.

Can you dye colored discs?

The iDye Poly is probably the best disc golf dye kit that you can use. Just take the powdered dye and cut the side slowly using a scissor. The next step is to fill the 2 plastic cups with shaving cream. The two cups represent 2 colors and if you want more color, then you can add additional cups.

How do you dye the bottom of a disc golf disc?

I used rit dye heated on the stove until it started steaming, put my vinyl down and ladled the dye into the disc. Let it sit for 10 – 15 minutes and this is what I got. This is a star destroyer. I used rit dye heated on the stove until it started steaming, put my vinyl down and ladled the dye into the disc.

How long should discs sit in dye?

Place your disc top down on the shaving cream and give it a slight twist. Let the disc set on the die for 24-36 hours then rinse off all shaving cream and dye.

See also:  Who Won The Heritage Golf Tournament?

Can you dye a disc twice?

the easiest is to do a black outline and then remove whatever parts of the mask you want the second color and dip again. you can dye over black and you still get black. for colors that need to remain true, best best is to remask and hand-cut on the disc.

What do you dye discs with?

Common substrates are lotion and shaving cream, but there are many other mediums used by dyers. The disc is placed top-down onto the dye and left to rest. Set times vary, but the longer the duration, the more saturated the color. For quicker results there is a method known as “hot dipping.”

How do you brainwave dye a disc?

When placing the disc to be dyed in the mix, be aware that dyeing begins in the first 20-30 seconds, so dye accordingly. Push it down, swirl and peel, if not content return to the dye plate for a “second pull”. If not content after 2nd pull, immediately rinse the disc and start over with a new bed mix and spare disc.

Leave a Reply

Your email address will not be published.