How To Clean Your Golf Irons
- Dip the iron in your lukewarm water.
- Scrub the entire head and face with your brush – pay special attention to the grooves.
- Use your towel to wipe off all dirt and debris.
- Dip the iron back in your water.
- Dry off using your towel.
- Repeat 1-5 if you still see dirt in your grooves.
How do you clean golf club heads?
Mix warm water and 2 teaspoons of dishwashing liquid or soap into a bowl or a bucket (depending on how many clubs you need to clean). Dip your soft-bristle brush or toothbrush into the mixture and carefully scrub your club head, making sure that it doesn’t get too wet.
How do I make my golf clubs shiny?
Take a wet towel with a little dab of dish soap on it, and clean your golf club grip. Rinse with a clean wet cloth. Dry your club and club grip with a new clean dry cloth. Optionally, you can use some chrome polish or metal polish to polish the golf club shaft and face to help protect against rust.
How do you keep your irons looking new?
8 Simple Ways to Care for Your Golf Clubs
- Store your golf clubs properly.
- Never put your golf clubs away when wet.
- Use a golf towel.
- Use head covers on your woods.
- Clean the club heads between plays.
- Don’t forget to clean the grips.
- Regularly inspect the grips for wear and tear.
Can you use magic eraser on golf clubs?
In removing scuff marks, all you need to have is a white magic eraser and then rub it against your golf irons. This should solve your problem, and you’ll say goodbye to those scuff marks in no time.
Can you use steel wool on golf clubs?
Cleaning golf clubs is an easy job with S.O.S® steel wool soap pads. The soap is built right in, so all you need to do is wet the pad, rub, and rinse. You’re left with shiny club heads and clean grips in no time! Reusable, versatile and with incredible scrubbing power.
Can you use wd40 on golf clubs?
You can use WD-40 on golf clubs. It can be an effective way to remove rust and dirt from the head and shaft. It can also be used to remove the grip, acting as a solvent when you are applying a new one.
Does WD-40 Remove rust?
WD-40 Specialist® Rust Remover Soak quickly dissolves rust and restores tools, equipment, and surfaces to bare metal without chipping, scraping or scrubbing.
Can you polish golf irons?
Apply any metal polish or car wheel polish to the golf clubs. Most polishes can be applied with a soft cloth or towel. Let them sit for a minute, then wipe the polish from the clubs. Spraying or wiping the shafts with polish can also help protect against rust.
How do you remove browning from golf clubs?
Soak the clubs in a few liters of cola (which sort of cola is not important) mixed with a few liters of water. Let them soak for about 5 minutes, but make sure not to leave them in longer than that. Scrub all of the rusty areas with the water and cola mixture.
Is it OK to wax golf clubs?
Any rust spots can be gently removed using fine grade steel wool. The steel wool should be at least 000, but preferably 0000, since anything more abrasive will scratch the shaft. Chrome polish or car wax can be applied after cleaning for extra care, but is not mandatory.
How do you bring golf clubs back to life?
Soap and Water This can be a good place to start for most clubs. With a simple mixture of soap and water, you do not need to worry about damaging the club. After a brief soak, use a small brush like a toothbrush to try and remove any rust. This works best if the rust buildup is not extreme.
Do golf irons wear out?
Golf irons will wear out over time. For an average golfer that plays golf a few times or practices a few times a week, you should get a good 7-10 years out of a set of irons. After this period, you may notice that in addition to the grooves being worn out, the ball doesn’t travel as far as it used to.