How To Choose A Golf Putter?

When choosing a putter, it is first important to get the right shaft length. Most putters come as standard in 34-inches but 33 and 35 shafts are available. Generally speaking, taller golfers will require a longer putter but much of it comes down to the golfer’s stance and posture.

How do I know what putter is right for me?

You want to balance the shaft of the putter horizontally across your open palm, allowing the head to rotate to its natural resting position. If the face points directly to the sky, you have a face-balanced putter. If the toe of the putter hangs down or to the side, you have a toe-hang putter.

Is a blade or mallet putter better?

Mallet-style putter designs provide higher MOI (moment of inertia), thus reducing the negative effects of off-center hits. Some choose to use blade putters because that’s what they’re comfortable with, and for others the blade-style is simply a better match for their stroke.

Which putter is best for my stroke?

To summarize, if you like to use a straight back, straight through method, a face-balanced putter would be a great choice. If your stroke works on a slight arc, a putter with moderate toe hang would be ideal, while those with more pronounced arcs in their stroke would benefit from even more toe hang.

Do expensive putters make a difference?

Many expensive putters actually do provide advanced performance (better stability and forgiveness on off center hits) characteristics that more basic, less hi-tech designs don’t. However, there are other high-end models that are simply much fancier versions of basic designs.

See also:  What Does Tipped Mean Golf Shaft?

Should I get fitted for a putter?

A putter fitting session can reap great rewards for golfers. Most importantly, it can fit you for the correct putter. It is important to get a proper putter fitting just like you would any other club. Due to the importance of your short game, don’t neglect getting the right fit for your most used club.

Who should use a 35 inch putter?

In general, golfers with a height of 5’9″ – 5’11” should use a 34″ length putter, 5’8″ and below should use a 33″, and those above 6′ should use a 35″ putter. A golfer’s posture also contributes to putter length. Upright posture suggests a longer putter, while hunched over suggests a shorter one.

Should I use a 33 inch putter?

The length of the putter will be directly related to your height. If you are 6 feet or taller, you will need a 35 inch putter, 5’9″ to 6″ suggests a 34 inch putter, while 5’6″ to 5’9″ suggests a 33 inch putter. Customized putter are suggested for those above 6’4″ and shorter than 5’6″.

Who should use a 38 inch putter?

These putters are typically issued in 36-38 inches with a long grip so that a player can choke down and take advantage of this technology. This method is a common go-to for players seeking control through less risk to manipulate the clubface due to the added weight.

What is the most forgiving putter?

Most Forgiving Putters

  • Odyssey 2-Ball Ten Putter. Reasons to buy.
  • Cobra King 3D Printed Agera Putter. Reasons to buy.
  • Scotty Cameron Phantom X 11.5 Putter. Reasons to buy.
  • Ping 2021 Fetch Putter. Reasons to buy.
  • TaylorMade Truss TB1 Putter.
  • Wilson Staff Infinite Buckingham Putter.
  • Mizuno M-Craft 3 Putter.
  • Evnroll ER11V Putter.
See also:  How Old Is Golf?

What is the easiest putter to use?

The most forgiving putter for beginners is the Odyssey White Hot Two Ball. The putter is designed to have a great feel, impressive roll, and easy alignment. The putter face is plenty big enough for golfers to get the roll and speed they want from their shots.

Are mallet putters more forgiving?

Mallet putters are said to be a bit more forgiving because of their size, and the blades are going to give some extra help when it comes to feel and control on the greens. Depending on your putting stroke, one of these two putters may be better for you than another.

What is mallet putter?

A mallet is a putter that has a larger clubhead around the club face. They are generally round, square, or what is referred to in the industry as “half moon.” The size allows the weight distribution to be done over a larger area. The size also allows for a more elaborate design for aiming aids.

Leave a Reply

Your email address will not be published.