How Long Should My Golf Clubs Be If I’M 6’4? (Solved)

Getting to Know Your Golf Club Length – How It Works and What Works for You?

Height Wrist-To-Floor Measurement Length of Golf Club
5’4” – 5’7” 32 inches – 34 inches Subtract 1/4 inch
5’7” – 6’1” 34 inches – 37 inches Standard size
6’1” – 6’2” 37 inches – 38.5 inches Add 1/4 inch
6’2” – 6’4” 38.5 inches – 40 inches Add 1/2 inch

1

How long should golf clubs be for my height?

The ratio of every 6″ of height to length should result in a 1″ variation in length, and there should be a 1 12″ difference between their 5-irons based on this formula. For example, 36.5″ for the woman and 38″ for the gentleman (or 36.75″ / 38.25″) are appropriate measurements.

How long should golf clubs be for 6ft?

A 5-iron’s typical length is 38 inches, which is considered to be standard. Golfers who are 6 feet tall and have wrists that are 35 inches from the ground should use standard-length clubs, but those who are the same height but have arms that are an inch longer should use clubs that are one-fourth inch shorter than they are.

How do I know what size golf clubs I need?

All you need to know about yourself is your height in order to select golf clubs that are the proper fit. It is recommended that you use the normal length golf clubs if your height is between 5’9″ and 6’0″ (1.5 m 23 cm and 1.8 m), else you should use the short length golf clubs. The length of your clubs will depend on your height, which should be greater than 6 ft (1.8 m).

See also:  What Year Is My Golf Cart By Serial Number? (Solution found)

What length should your clubs be?

Despite the fact that the Rules of Golf for competition allow for club shaft lengths of up to 48 inches, Golf Monthly reports that the average driver length used on the tour is “only” 44.5 inches, while the average driver length at golf stores is around 45.5 inches, according to Golf Monthly.

What is the standard length of a 4 iron?

Irons are commonly available in a standard length. This standard measurement grows by 1/2 inch for each subsequent number of iron in the series. For example, the standard length for a steel 2 iron is 39 inches; the standard length for a steel 3 iron is 38.5 inches; the standard length for a steel 4 iron is 38 inches; and so on until the steel 9 iron has a standard length of 35.5 inches.

Are my irons too long?

5 Signs that your golf clubs are excessively long While gripping the club, you must maintain virtually full straightness of posture. While swinging the golf club, you are not allowed to move your lower body. You continue to strike the ball with the toe of the golf club. When the club hits the ball, it has a tendency to swerve to the left or to fly too high.

How do you measure club length?

In this case, a 48″ golf club ruler is used to measure the length of the club’s rear, with its tip resting on the ground at the heel of the club. The ultimate length is measured from the border of the grip cap to the center of the grip cap (and not the very top). This strategy is employed in all circumstances, with the exception of putters where the shaft is not situated near the heel of the foot.

Leave a Reply

Your email address will not be published.